1 × $48.00×
Spode Versailles Square Vegetable Bowl in great condition. It measures 2.5″ high x 9.25″ x 9.25″.
Spode is a well-known English brand of pottery and homewares based in Stoke-on-Trent.
Spode is a Stoke-on-Trent based pottery company that was founded by Josiah Spode (1733–1797) in 1770. Josiah Spode earned renown for perfecting under-glaze blue transfer printing in 1783–1784 – a development that led to the launch in 1816 of Spode’s Blue Italian range which has remained in production ever since.
Josiah Spode is also often credited with developing a successful formula for fine bone china. Whether this is true or not, his son, Josiah Spode II, was certainly responsible for the successful marketing of English bone china.
Today Spode is owned by Portmeirion Group, a pottery and homewares company based in Stoke-on-Trent. Many items in Spode’s Blue Italian and Woodland ranges are made at Portmeirion Group’s factory in Stoke-on-Trent.
Dish, 1831, manufactured by Spode Ceramic Works V&A Museum no. 566A-1902
Josiah Spode is known to have worked for Thomas Whieldon from the age of 16 until he was 21. He then worked in a number of partnerships until he went into business for himself, renting a small potworks in the town of Stoke-on-Trent in 1767; in 1776 he completed the purchase of what became the Spode factory until 2008. His early products comprised earthenwares such as creamware (a fine cream-coloured earthenware) and pearlware (a fine earthenware with a bluish glaze) as well as a range of stonewares including black basalt, caneware, and jasper which had been popularised by Josiah Wedgwood. The history and products of the Spode factory have inspired generations of historians and collectors, and a useful interactive online exhibition was launched in October 2010.
Underglaze blue transfer printing
Josiah Spode I is credited with the introduction of underglaze blue transfer printing on earthenware in 1783–84. The Worcester and Caughley factories had commenced transfer printing underglaze and over glaze on porcelain in the early 1750s, and from 1756 overglaze printing was also applied to earthenware and stoneware. The processes for underglaze and overglaze decoration were very different. Overglaze “bat printing” on earthenware was a fairly straightforward process, and designs in a range of colours including black, red and lilac were produced. Underglaze “hot-press” printing was limited to the colours that would withstand the subsequent glaze firing, and a rich blue was the predominant colour. To adapt the process from the production of small porcelain teawares to larger earthenware dinnerwares required the creation of more flexible paper to transmit the designs from the engraved copper plate to the biscuit earthenware body, and the development of a glaze recipe that brought the color of the black-blue cobalt print to a brilliant perfection. When Spode employed the skilled engraver Thomas Lucas and printer James Richard, both of the Caughley factory, in 1783 he was able to introduce high quality blue printed earthenware to the market. Thomas Minton, another Caughley-trained engraver, also supplied copper plates to Spode until he opened his own factory in Stoke-on-Trent in 1796.
This method involved the engraving of a design on a copper plate, which was then printed onto gummed tissue. The colour paste was worked into the cut areas of the copper plate and wiped from the uncut surfaces, and then printed by passing through rollers. These designs, including edge-patterns which had to be manipulated in sections, were cut out using scissors and applied to the biscuit-fired ware (using a white fabric), itself prepared with a gum solution. The tissue was then floated off in water, leaving the pattern adhering to the plate. This was then dipped in the glaze and returned to the kiln for the glost firing. Blue underglaze transfer became a standard feature of Staffordshire pottery. Spode also used on-glaze transfers for other wares. The well-known Spode blue-and-white dinner services with engraved sporting scenes and Italian views were developed under Josiah Spode the younger, but continued to be reproduced into much later times.
The bone china formula
During the 18th century many English potters were striving and competing to discover the industrial secret of the production of fine translucent porcelain. The Plymouth and Bristol factories, and (from 1782–1810) the New Hall (Staffordshire) factory under Richard Champion’s patent, were producing hard paste similar to Oriental porcelain. The technique was developed by adding calcined bone to this glassy frit, for example in the productions of Bow porcelain works and Chelsea porcelain works, and this was carried on from at least the 1750s onwards. Soapstone porcelains further added steatite, known as French chalk, for instance at Worcester and Caughley factories.
The bone porcelains, especially those of Spode, Minton, Davenport and Coalport, eventually established the standards for soft-paste porcelain which were later (after 1800) maintained widely. Although the Bow porcelain factory, Chelsea porcelain factory, Royal Worcester and Royal Crown Derby factories had, before Spode, established a proportion of about 40–45 per cent calcined bone in the formula as standard, it was Spode who first abandoned the practice of calcining or fritting the bone with some of the other ingredients, and used the simple mixture of bone ash, china stone and kaolin, which since his time set the basic recipe of bone china. The traditional bone china recipe was 6 parts bone-ash, 4 parts china stone and 3.5 parts kaolin, all finely ground together.
Josiah Spode I effectively finalised the formula, and appears to have been doing so between 1789 and 1793. It remained an industrial secret for some time. The importance of his innovations has been disputed, being played down by Professor Sir Arthur Church in his English Porcelain, estimated practically by William Burton, and being very highly esteemed by Spode’s contemporary Alexandre Brongniart, director of the Sèvres manufactory, in his Traité des Arts Céramiques, and by M. L. Solon hailed as a revolutionary improvement.
Many fine examples of the elder Spode’s productions were destroyed in a fire at Alexandra Palace, London in 1873, where they were included in an exhibition of nearly five thousand specimens of English pottery and porcelain. As the understanding of the work of the early potters depends in part on the study of actual specimens, the loss was both aesthetic and scientific.
The business was carried on through his sons at Stoke until April 1833. Spode’s London retail shop in Portugal Street went by the name of Spode, Son, and Copeland.
Among the many surviving Spode documents are two shape books dated to about 1820 which contain thumbnail sketches of bone china objects with instructions to throwers and turners about size requirements. One copy is in the Joseph Downes collection at Winterthur Museum, Gardens, and Library, Delaware, USA.
After some early trials Spode perfected a stoneware that came closer to porcelain than any previously, and introduced his “Stone-China” in 1813. It was light in body, greyish-white and gritty where it was not glazed and approached translucence in the early wares; later Stone-Ware became opaque. Spode pattern books, which record about 75000 patterns, survive from about 1800.
In Spode’s similar “Felspar porcelain”, introduced on the market in 1821, felspar was an ingredient, substituted for the Cornish stone in his standard bone china body, giving rise to his slightly misleading name “Felspar porcelain,” to what is in fact an extremely refined stoneware comparable to the rival “Mason’s ironstone”, produced by Josiah II’s nephew, Charles James Mason, and patented in 1813 Spode’s “Felspar porcelain” continued into the Copeland & Garrett phase of the company (1833–1847). Armorial services were provided for the Honourable East India Company, 1823, and the Worshipful Company of Goldsmiths, c1824. Some of the ware employed underglaze blue and iron red with touches of gilding in imitation of “Imari porcelain” that had been introduced on Spode’s bone china in the first decade of the century: the most familiar “Tobacco-leaf pattern” (2061) continued to be made by Spode’s successors, William Taylor Copeland, and then “W.T. Copeland & Sons, late Spode”.
Later forms of the business
Messrs Spode were succeeded in the same business in c. 1833 by Copeland and Garrett, who often used the name Spode in their marks. In particular these are called ‘Late Spode’ and include productions of the so-called ‘Felspar porcelain’. They also produced other kinds of bone china, earthenware, parian, etc. The partnership continued in this form until 1847. After 1847 the business continued until 1970 as W.T. Copeland and sons, and again the term ‘Spode’ or ‘Late Spode’ continued in use alongside the name of Copeland. Under the name ‘Spode Ltd’ the same factories and business was continued after 1970.
In 2006, the business merged with Royal Worcester. The merged company entered administration on 6 November 2008. The brand names and intellectual property were acquired by Portmeirion Group on 23 April 2009.
On 23 April 2009 Portmeirion Pottery purchased their rival Royal Worcester and Spode brands, together with some of the stock, after they had been placed into administration the previous November. The purchase did not include Royal Worcester or Spode manufacturing facilities. Many items in Spode’s Blue Italian and Woodland ranges are now made at Portmeirion Group’s factory in Stoke-on-Trent.
|Dimensions||14 × 14 × 10 in|